Store Info
Map To Us
Email Us
Order Form

Rock Polishing
Rock Saws
Sphere Makers


Jewelry Tools

Prices updated December 21, 2011

This is our professional work horse 12" Slab Saw. It has a ball bearing carriage and fixed rate of power feed. The full hinged hood holds back the oil mist and also features a safety glass window for viewing. The large vise can hold up to 4 1/2" X 7" rough, and the cross feed lets you do several cuts without repositioning. Coolant tray is removable for easy cleaning.

Comes COMPLETE with 18” x .125” x ¾” blade and 1/3 hp motor with thermal overload protection. Requires 2 gallons of cutting oil.

12" Trim Saw
Shipped Motor Freight Only

This is our high performance 14" Slab Saw. It is quiet, clean bench top saw. Offering straight, smooth cuts in even the hardest of agates at twice the speed of standard saws this is a GEM!

This saw features the PANTHER 14" premium blade and fast fixed rate of power feed that delivers cuts at 15 inches per hour. Sealed high-performance bearings, a rugged 5 1/2" X 6 5/8" capacity vise, and threaded cross feed are all standard.

Requires 2-1/2 gallons cutting oil.


14" Slab Saw
Shipped  Motor Freight Only

The frame, drive guard, and tank are of heavy gauge welded steel for long life of work. The hinged hood provides easy access when open and the side window allows convenient monitoring of the cut.

Adjustable feed rate of 9 1/2" to 19 1/4" per hour and threaded crossfeeds makes it easy to use. Large cast aluminum vise opens to cut from 7" X 7 1/4" rough and rolls smoothly on sealed ball bearings over substantial vise carriage ways.

This unit features adjustable leveling feet, automatic cutoff and safety switches, double sealed ball bearings, 3/4" arbor, 2" drain, 18” x .125” x ¾” blade and 1/2 HP heavy duty motor.

It is shipped complete and assembled, ready to use. Requires 3 gallons of cutting oil.

18" Slab Saw
Shipped  Motor Freight Only

Heavy Duty Slab Saws

High Performance Saws

For Cutting Glass or Stone

By Covington

  • Heavy welded steel chassis with separately welded inner frame to eliminate warp
  • One piece vise carriage is mounted on a solid key stock with channel iron guide to provide rigidity and strength for fast cuts with heavy loads Quick return system which allows carriage to be manually returned to any position
  • Six speed power feed with automatic shut-off
  • Over-running clutch which automatically adjusts to hard rock and changes length of cut as blade cuts through stone
  • Cross feed which permits 8" of material to be slabbed without re-clamping
  • One piece arbor and flange mounted in housing with grit slinger
  • Heavy duty ball bearings, neoprene sealed and greased for life
  • Completely assembled with vise, motor and our best diamond blade